A Cover for Dana 44 Differentials

Inglewood, CA - PML announces an aftermarket differential cover for
front and rear end Dana 44 differentials.  The design features classic
straight fins and follows the shape of the stock cover. Unlike the stock cover, this aftermarket cover has sand cast aluminum construction with thick walls and gasket flange.

Thick walls add strength to the differential housing.  The thick gasket flange provides a secure, leak-free seal.  The aluminum material and the fins allow for heat dissipation to transfer heat out of the differential fluid.

The Dana 44 differential has many applications in 1940s to 1980s
vehicles.  For example, this differential cover will fit the front end
on 1960s and 70s Ford F100, F250, and F350, the front end on 1970s and
80s Jeep Wagoneer and Cherokee, and the rear end on 1940s to 70s Jeep CJ
and some Jaguars.

The cover has a drain hole for less messy fluid changes and a magnetic
drain plug to collect any metal bits, keeping the differential fluid
cleaner. There is also a level check hole.

PML offers this differential cover in three finishes: cast aluminum,
black powder coat with shaved fins, and polished. The PML part number is
11069.  Made in the USA. Pictures and dimensions are available on our
website at: http://www.yourcovers.com   
 

Cooler Transmissions for Nissan Titan

Inglewood, CA – PML announced today a new, aftermarket deep aluminum transmission pan for Nissan RE5-R05A transmissions found in Titan trucks and Armada SUVs. PML designed and developed this pan in response to demand from Titan owners for an extra-capacity pan.

PML’s Nissan transmission pan helps keep transmission oil cool in three ways.  First, the pan adds 3.5 additional quarts of oil capacity. Second, the pan features raised fins on the outside. Third, PML designed cast-in baffles on the inside of the pan that keep oil near the filter inlet and aid in heat transfer from the oil to the pan.

PML’s new transmission pan also features a cast-in boss that can be drilled and tapped for a temperature sensor, 3/16-inch thick wall to add strength to the transmission case, 3/8-inch thick gasket flange for a secure seal, and a magnetic drain plug for easier, less messy maintenance.

This pan is made in the USA by PML.  To purchase a pan or for more information, please contact PML.

The pan is available in as-cast, black, and polished finishes. The PML part number is 11037. PML also manufactures and sells a matching Titan differential cover.
Dodge Ram extra deep tranny panInglewood, CA – PML now offers an extra deep aluminum transmission pan for 2007 and newer Dodge Ram 2500 and 3500 diesel trucks with 6.7L engines. This new pan adds four additional quarts of oil capacity to the 6-speed 68RFE transmission in these heavy duty trucks.

The increased oil capacity and raised fins on the outside help reduce oil temperatures, resulting in less wear and tear on the transmission. The pan has cast-in internal baffles to keep the oil near the filter inlet, preventing the need for a filter extension.

The pan also features: a cast-in boss that can be drilled and tapped for a temperature sensor, 3/16-inch thick wall to add strength to the transmission case, 3/8-inch thick gasket flange for a secure seal, and a magnetic drain plug for easier, less messy maintenance.

The pan is available in as-cast, black, and polished finishes. The PML part number is 11039. The pan also fits vehicles with the Dodge 545RFE transmission such as the Ram 1500 with the 4.7 or Hemi engine, 2000 and newer Dakota and Durango with the 4.7 engine, and 1999 and newer Jeep Grand Cherokee with 4.7 engines.
Award Winning Valve Covers
 

Inglewood, CA, January 18, 2007 – At the SEMA Show November 2007, PML won a Global Media award for their new sand cast aluminum valve covers with vintage CHEVROLET® or CORVETTE® script and fins. These new covers are now available.

These aftermarket valve covers will fit the heads found on many crate engines, mid-90s Pontiac Trans Am and Firebird, and 1987-1998 Silverado, Sierra, Suburban, Tahoe, Corvette, Impala SS, and Camaro Z28.

PML designed these covers for a clean and classic appearance. The design removed two boltholes and the PCV/breather/oil fill holes from the top surface and added raised CHEVROLET or CORVETTE script and fins. These covers use only the two outer boltholes. The sand cast aluminum construction is so much stiffer than stock that you do not need four bolts to apply pressure evenly to the gasket.

If holes are needed for oil fill, PCV, or breather, they can be cut into the intake side of the valve cover. Baffles are cast into the interior of the cover in two locations opposite where the holes would go. This leaves the top surface where the fins and lettering are completely clean.

The covers are slightly taller than stock to allow roller tip rockers and are designed to use the stock gaskets. These valve covers are available in as-cast, black or Chevrolet orange powder coated with brushed fins and script, and polished finishes. The PML part number is 11040 for the CHEVROLET script and 11041 for the CORVETTE script.

About PML: In 1986, PML began by providing dimensional inspection, prototyping, tooling, reverse engineering, and CAD modeling to the manufacturing industry. In 1998, PML began the transition to the automotive aftermarket with the design and manufacture of Cadillac valve covers. Today, PML offers more than 100 pans and covers. All PML products are designed and manufactured in the USA. PML is a member of SEMA, ORBA, and the Goodguys Rod & Custom Association.

General Motors Trademarks are used under license to PML, Inc.

Differential Cover for the Chevrolet SSR Inglewood, CA – PML announces an aftermarket differential cover for the Chevrolet SSR. The cover features extra capacity, sand cast aluminum construction, and a drain hole with a magnetic drain plug. PML designed this cover for the Torsen 10 bolt rear axle found in 2003-06 SSR with automatic transmission and other GM vehicles such as Trailblazer, Envoy, Colorado, Canyon, Olds Bravada, and Buick Renier.

This differential cover increases fluid capacity by 0.5 quarts over stock. The increased capacity reduces temperatures, lessening wear and tear on the differential. On the outside of the cover, raised fins help keep oil cool and add a custom look.

The sand cast aluminum construction adds 3/16-inch thick wall construction to add strength to the differential housing and 3/8-inch thick gasket flange that will not bend when bolts are tightened. The gasket flange is machined for a secure seal with RTV or factory reusable gasket.

The drain hole allows for easier, less messy maintenance. A magnetic drain plug collects any metal bits so the differential fluid is kept cleaner. The cover has a fill hole on top and on the side there is a cast-in boss that can be drilled and tapped for a temperature sensor.

PML offers this differential cover in three finishes: cast aluminum, black, and polished. The PML part number is 11035.

About PML: In 1986, PML began by providing dimensional inspection, prototyping, tooling, reverse engineering, and CAD modeling to the manufacturing industry. In 1998, PML began the transition to the automotive aftermarket with the design and manufacture of Cadillac® valve covers. Today, PML offers more than 100 pans and covers. All PML products are designed and manufactured in the USA. PML is a member of SEMA, ORBA and Goodguys Rod and Custom Association

Center of Attention for Center Bolt Small Block ChevyTM Engines

Inglewood, CA, May 20, 2006 – PML announces sand-cast aluminum valve covers for 1987-1998 small block Chevrolet® center bolt style heads. These heads are found on Silverado/Sierra, Suburban, Tahoe, Corvette, Impala SS, and Camaro Z28. Instead of four bolts, these covers require two bolts for assembly for a cleaner appearance.

On the inside, these valve covers feature cast-in baffles. On the outside, the covers have fins for a custom look. The covers are slightly taller than stock to allow roller tip rockers. Sand-cast aluminum construction adds thick walls for strength and thick gasket flanges for a secure seal. Two locations on the intake manifold side can optionally be machined for PCV or breather holes. These valve covers are available in as-cast, black or Chevrolet orange powder coated with brushed fins, and polished finishes. The PML part number is 10534.

About PML: In 1986, PML began by providing dimensional inspection, prototyping, tooling, reverse engineering, and CAD modeling to the manufacturing industry. In 1998, PML began the transition to the automotive aftermarket with the design and manufacture of Cadillac valve covers. Today, PML offers more than 100 pans and covers. All PML products are designed and manufactured in the USA. PML is a member of SEMA and ORBA.

A Titan of a Differential Cover

 

Inglewood, CA – June 1, 2005 – PML now manufactures and sells a new extra-capacity differential cover for the Nissan Titan.  PML designed this cover with fins and additional oil capacity for cooler differential temperatures.  Many Titan owners have reported overheating especially when towing and have been looking for a way to reduce temperatures. PML heard from these owners and designed a cover in response to their needs.  PML received over 25 pre-orders for these covers before starting production.

The new PML Nissan Titan rear differential cover features 0.75 quarts more oil capacity than the stock 2005 cover.  With fins, the new cover is 1 1/4 inches deeper than stock 2005 cover, 2 inches deeper than the stock 2004 cover.  The cover has a boss for a temperature sensor, a level check/fill hole and includes mounting bolts. Like all PML covers, it also features sand-cast aluminum construction, thick walls to add strength to the differential housing, a .375" thick gasket flange that will not bend when bolts are tightened, and a machined gasket surface for a secure seal using RTV or factory gasket.

The differential cover is available in three finishes:  as-cast, black powder coated, polished.

About PML:  PML began in 1986 providing first article and dimensional inspection to the Southern California manufacturing industry.  Services expanded to include prototyping, tooling, reverse engineering, CAD modeling, and designing and manufacturing automotive products.  All PML products are designed and manufactured in the USA.  PML is a SEMA member and holds current ISO 9001:2000 certification.

PML Dana 60 Front Differential Cover

Inglewood, CA – September 15, 2003 – PML now manufactures a differential cover for Dana 60 front differentials.  This differential cover fits many Super Duty Ford and Dodge Ram 2500 and 3500 trucks. The PML Dana 60 front differential cover is slightly taller than stock height with room for steering linkage clearance. For off-road, towing, or heavy-duty applications, the cover has increased oil capacity and strong cast-aluminum construction.   

The PML Dana 60 front differential cover features increased capacity of 0.6 quarts over stock for lower oil temperatures.  Heat causes oil to break down which results in added wear on the gears and bearings in the differential.  The cover has stiff aluminum construction with 0.160” thick walls for increased torsional strength to the differential housing. The precision-machined gasket flange is 0.350” thick to provide a uniform clamping force on the gasket. This ensures a secure seal.  A magnetic drain plug allows easy oil changes without the mess of removing the whole cover.  The cover has three holes for drain, fill and check.  Raised fins give a custom look

The PML Dana 60 front differential cover is available in three finishes:  as-cast, black powder coated, polished.

About PML:  PML began in 1986 providing first article and dimensional inspection to the Southern California manufacturing industry.  Services expanded to include prototyping, tooling, reverse engineering, CAD modeling, and designing and manufacturing automotive products.  All PML products are designed and manufactured in the USA.  PML is a SEMA member and holds current ISO 9002 certification.

PML Ford 9.75 RG, 12 Bolt Differential Cover

Inglewood, CA – September 15, 2003 – PML now manufactures a differential cover for Ford 9.75 ring gear, 12 bolt applications.  These differentials are found on Ford F150 and Expedition vehicles.  For off-road, towing, or heavy-duty applications, the cover has increased oil capacity and strong cast-aluminum construction.   

The PML Ford 9.75 RG, 12 bolt differential cover features increased capacity of 0.5 quarts over stock for lower oil temperatures.  Heat causes oil to break down which results in added wear on the gears and bearings in the differential.  The cover has stiff aluminum construction with 0.160” thick walls for increased torsional strength to the differential housing. The precision-machined gasket flange is 0.350” thick to provide a uniform clamping force on the gasket. This ensures a secure seal.  The cover has drain and fill holes.  A magnetic drain plug allows easy oil changes without the mess of removing the whole cover.  Raised fins give a custom look

The PML Ford 9.75 RG, 12 bolt differential cover is available in three finishes:  as-cast, black powder coated, polished.

About PML:  PML began in 1986 providing first article and dimensional inspection to the Southern California manufacturing industry.  Services expanded to include prototyping, tooling, reverse engineering, CAD modeling, and designing and manufacturing automotive products.  All PML products are designed and manufactured in the USA.  PML is a SEMA member and holds current ISO 9002 certification.

New PML Ford TorqShift™ Deep Transmission Pan

Inglewood, CA – October 10, 2003 – PML now manufactures an extra capacity Ford TorqShift transmission pan. This transmission is used with the 6.0L Power Stroke Diesel.  PML designed this deep pan to help the TorqShift transmission better handle the high stresses of towing and hauling.

The PML Ford TorqShift deep transmission pan features a capacity of 4.5 quarts over stock for reduced oil temperatures.  The sand-cast aluminum construction and design provide strength and great looks. Raised fins also keep oil cool and add to the custom look.  The pan has a precision-machined 0.350 inch-thick gasket flange for a uniform clamping force on the gasket so the pan is much less prone to leak than a stock pan which is typically 0.035 inch-thick stamped steel.  The pan comes with a magnetic drain plug for easy oil changes and an un-drilled boss for temperature sensors. PML designed the Ford TorqShift deep transmission pan with thick wall construction to add strength to the whole transmission case.

The PML Ford TorqShift deep transmission pan is available in three finishes:  as-cast, black powder coated, polished.

About PML:  PML began in 1986 providing first article and dimensional inspection to the Southern California manufacturing industry.  Services expanded to include prototyping, tooling, reverse engineering, CAD modeling, and designing and manufacturing automotive products.  All PML products are designed and manufactured in the USA.  PML is a SEMA member and holds current ISO 9002 certification.

New PML AAM 11.5 RG, 14 Bolt Differential Cover

 Inglewood, CA – November 1, 2004 – PML now has an extra-capacity differential cover for rear differentials on 2003 and newer Dodge Ram 2500 & 3500 trucks. PML designed this differential cover to make it easy to follow the 15K oil change interval that Dodge specifies for the AAM axles used in 2003 and newer Ram 2500 & 3500 trucks. 

The cover features oil fill, level check, and drain holes and an undrilled boss for a temperature sensor.  It holds 0.75 quarts over stock.  The increased oil capacity and the raised fins help reduce oil temperatures.  The cover also features a precision-machined 3/8-inch gasket flange for a leak free seal.  The thick wall sand-cast aluminum construction adds strength to the differential housing. The cover comes with a magnetic drain plug.

These features benefit those using their Dodge Ram for towing or hauling or in harsh driving conditions.  PML also makes a matching differential cover for the front differential (AAM 9.25 RG, 14 Bolt) and a cover for the smaller 10.5 RG differential also found on these Dodge RAM trucks.  The PML AAM 11. 5 RG, 14 Bolt differential cover is available in three finishes:  as-cast, black powder coated, polished.

About PML:  PML began in 1986 providing first article and dimensional inspection to the Southern California manufacturing industry.  Services expanded to include prototyping, tooling, reverse engineering, CAD modeling, and designing and manufacturing automotive products.  All PML products are designed and manufactured in the USA.  PML is a SEMA member and holds current ISO 9001:2000 certification.

New PML AAM 10.5 RG, 14 Bolt Differential Cover

Inglewood, CA – October 20, 2004 – PML now has an extra-capacity differential cover for rear differentials on 2003 and newer Dodge Ram 2500 & 3500 trucks. PML designed this differential cover to make it easy to follow the 15K oil change interval that Dodge specifies for the AAM axles used in 2003 and newer Ram 2500 & 3500 trucks. 

The cover features oil fill, level check, and drain holes and an undrilled boss for a temperature sensor.  It holds 0.8 quarts over stock.  The increased oil capacity and the raised fins help reduce oil temperatures.  The cover also features a precision-machined 3/8-inch gasket flange for a leak free seal.  The thick wall sand-cast aluminum construction adds strength to the differential housing. The cover comes with a magnetic drain plug.

These features benefit those using their Dodge Ram for towing or hauling or in harsh driving conditions.  PML also makes a matching differential cover for the front differential (AAM 9.25 RG, 14 Bolt) and a cover for the larger 11.5 RG differential also found on these Dodge RAM trucks.  The PML AAM 10. 5 RG, 14 Bolt differential cover is available in three finishes:  as-cast, black powder coated, polished.

About PML:  PML began in 1986 providing first article and dimensional inspection to the Southern California manufacturing industry.  Services expanded to include prototyping, tooling, reverse engineering, CAD modeling, and designing and manufacturing automotive products.  All PML products are designed and manufactured in the USA.  PML is a SEMA member and holds current ISO 9001:2000 certification.

For more info on PML products, click