Go Weld for on the road horse trailer repair

Kent

13 years ago

GOWELD, Repairing Your Trailer on the Road.

By H. Kent Sundling

We welded on a horse trailer on the side of the road to test GOWELD. Worked better with 100% argon gas verses 25% we tried first. We did break the wire a few times while we got the settings dialed in. We used separate batteries, but you could use the batteries in your truck. You just need to disconnect the truck cables and attach cables to GOWELD in series not parallel. Comes with several tips. Go Weld for on the road horse trailer repair.

A very versatile welder. Welds weld metal up to 1/2 inch thick with 2 batteries or 1 inch with 3 batteries. Lights on the side of the hand held unit tells you if the batteries are hooked up right or low on power, green for charged and red for low charge. Deep cycle batteries will give you the longest weld time. Which can be 20 minutes between battery charges. Duty Cycle is 50%. We welded aluminum, but GOWELD will work with steel, stainless and hardfacing, reverse or straight polarity. The handle holds a 2 lb spool of wire to handle .023 to .045 diameter size. Priced like a typical shop welder. Welds well.

The military has GOWELD and plasma cutters in many of their Humvees, tanks and armored personal carriers. GOWELD is very portable, the wire spool is in the handle. Just clamp the cables to your trucks batteries, run the hose to a tank of Argon gas or use coated wire and you’re ready to weld anywhere. You can even buy a adapter to plug the GOWELD into 110 volt and use it in your shop or garage. Why wouldn’t you want one? Imagine what it would cost to have your broke down trailer towed to a welding shop and pay whatever they charge. Or welding farm machinery in the field. GOWELD could be a valuable tool to a horse trailer dealer, farmer and rancher. I use to use a welding truck when working on irrigation sprinklers or welding feed bunk railing, this could save some money on repairs and just toss the case in the pickup truck.

Nice compact unit. Lid opens for loading wire, above. It’s all in the gun, the chassis has the motor, drive assembly, trigger, micro switch, gas valve, circuit board and wire spool. Below left, large knobs for voltage and wire speed which ranges from 50-1000 ipm. Ball bearings in the industrial motor and wire tension wheel.

Color look familiar? These boxes are in Iraq, repairing tanks and trucks for the military. Portable is a good feature repairing on the battle field. They also sell portable plasma cutters, so you can do it all on location.

Practice welds left above, on the trailer next right. Keeping down time to a minimum on the road.

For more info go to www.GOWELD.com

Special thanks to Max the welder and Transwest Truck Trailer RV for the trailer and help. www.trailerwest.com/

Kent

First 32 years on the farm, moved to the big city to sell trucks to save the farm AD (after the divorce) sold pickup trucks for 10 years in Denver. Last 12 years I review trucks, trailers and towing accessories in horse magazines, Farm Journal, Fence Post and on RFD TV NewPass#1Fupak

See Full Bio