GanderLock Ultimate Gooseneck Trailer Lock, when you’re serious about Protecting your Trailer, Tack and Cargo.
GanderLock Ultimate Gooseneck Trailer Lock: In a recession when theft is up, are you an easy target? Protect your trailer as well as your expensive saddles, bridles, tools and flat screen TV. Goosenecks are different from bumper pulls, if you just lock the coupler, the thief’s loosen the set bolts, slide out your adjustable coupler from your gooseneck and put their own back in and away goes your investment. You need a gooseneck trailer lock for the gooseneck tube. If you lock the coupler and lock the set bolts or set bolt and thru pin, then you have 3 keys for three locks. Another problem is the locks are on the outside. So the bad guys can beat on the locks with hammers, use cordless reciprocating saws and crowbars. It’s the old bear story where if you and your buddy are being chased by a bear, you don’t have to outrun the bear, just your buddy running next to you. If you have a good lock system on your trailer, the bad guys or gals will move on looking for the easy target. GanderLock Ultimate Gooseneck Trailer Lock. Buy now…
As reviewed on RFD TV
Three Models of GanderLock, 4 in round, 4 in square and 4.5 in square
Lock your Trailer not the Coupler
GanderLock Ultimate Gooseneck Trailer Lock;
In this economy trailer theft is up, you’d be surprised how fast a stolen trailer becomes a “homemade trailer” and re-titled in another state. Thief’s are like coyotes, they adapt fast and look for easy targets. Don’t be the easy target. I have 3 trailers in my back yard plus the new trailers I review and they all have locks. Buy now…
GanderLock fits inside your 4 inch gooseneck stem, just twist the handle and pegs come out where the thru pin goes. Now the lock is inside the gooseneck main tube where thief’s can’t access it. Picture right is the adjustable coupler tube that drops out of your gooseneck then GanderLock slides up in the main tube and locks. The man who invented GanderLock had two trailers stolen, his loss is our gain with a well made lock, Made in America. Buy now…
|
|||
Unprotected….. |
Just loosen the set bolts |
Pull the thru pin |
Drop out the coupler |
Insert GanderLock | If you have an older trailer without a thru pin, GanderLock comes with a template to drill your own thru bolts which secures your tube in general | How do you break into that? | This is the view thieves don’t get to see |
Solid end goes up the tube |
Twist handle on bottom |
Secure lock |
Twist the pegs out |
|